Xtool Upgrade Tool V2.0.57 【2025-2026】

If you use LightBurn instead of XCS, note that the Upgrade Tool is still required for firmware updates. LightBurn does not handle firmware flashing directly.

The tool is typically used in a specific four-step workflow to ensure the device's vehicle database is current: Xtool.co.uk Download & Install : The tool is available for download on the XTOOL official website under "Download Update Tools". Device Registration

This usually happens if you used an incompatible upgrade tool (e.g., TP200 software on a VAG401 device). Solution: Format your TF/SD card completely (using FAT32 format). Then, repeat the process exactly with v2.0.57 to rewrite the correct system files.

Always download the upgrade tool directly from the official xTool Support Center. Avoid third-party forums to protect your system from malware and corrupted firmware files. Step 2: Install the Drivers

Double-click the .pkg file. If a security warning appears, navigate to System Settings > Privacy & Security and click "Open Anyway." Step 3: Connect Your Laser Power off your xTool laser machine. Disconnect any rotary attachments or extension kits. xtool upgrade tool v2.0.57

To avoid corruption or bricking your motherboard, follow this sequence exactly. Step 1: Preparation and Environment Setup

What (Windows or macOS) is your computer running?

: Specifically engineered for the VAG401 Professional Tool , which diagnoses VW, Audi, Seat, and Skoda vehicles.

If you run into persistent issues, xTool provides official support articles and a ticket system via their support center. Their technical team can supply older firmware versions or installers that are no longer publicly listed. If you use LightBurn instead of XCS, note

Click . The tool will automatically scan and bind to the correct COM port associated with your laser cutter. Phase 3: Firmware Injection

Uses the device's Serial Number (S/N) and a unique password found in the "About" section of the device UI for registration and login.

Requires a USB cable or an SD card reader depending on the device model.

Are you performing a or trying to recover a bricked machine ? Device Registration This usually happens if you used

Improved compatibility with Windows 10/11 and macOS architecture, ensuring the virtual COM ports (CH340/CH341 drivers) do not drop connections mid-update.

: For laser machines like the F1 or S1.

How to Upgrade

Based on the testing results, the deployment of is APPROVED .

You are using the wrong password format. Solution: For many xTool registers, the "Dealer Code" required during registration is “XTOOL” (all uppercase). Also, ensure there are no typos in the serial number displayed on your device's "About" page.