Vcds Revoked Fix ((top)) Access

Open your VCDS loader software and run an interface test. It should now show . How to Prevent Your VCDS Cable from Being Revoked Again

To prevent the software from contacting Ross-Tech servers and revoking your license again, create a firewall rule. Open .

Once your interface is operational, take these critical preventative measures to ensure it stays that way.

Identify the core components: Look for the large square chip and the smaller FTDI FT232 chip. Step 2: Reprogram the FTDI Chip using FT_Prog

Locate the Ross-Tech interface under "Universal Serial Bus controllers" or "Ports (COM & LPT)." vcds revoked fix

Reinstall the specific version of the software that came with your cable (often provided on a CD or a specific download link from the seller). Do not download the latest version from the official Ross-Tech website if you are using a clone. 2. Mandatory Firewall & Offline Use To prevent the status from returning:

When a clone cable connects to the internet while the VCDS software is running, the software communicates with Ross-Tech servers. The software identifies the cloned serial number and pushes a silent command that wipes or alters the configuration data (EEPROM) inside your cable's FTDI or Atmega chip. Once this data is corrupted, the software locks you out completely. Prerequisites Before Starting the Fix

Often, the software only targets the FTDI chip's USB descriptors to prevent Windows from recognizing the device. Plug the revoked VCDS cable into your PC via USB. Download and launch . Click Devices > Scan and Parse .

Place the PCB back into the plastic shell and secure the screws. Open your VCDS loader software and run an interface test

To prevent revocation in the first place, many tech-savvy owners run VCDS on a dedicated laptop or a Virtual Machine (VM)

If the interface is found but still shows revoked, click on the button and check if a "Reset" or "Re-activate" option is available.

Do not plug a clone cable into a computer that has a legitimate version of VCDS installed, as the background services will immediately flag the device. The Ultimate Long-Term Fix: Upgrading to Genuine Hardware

If your cable was bought on eBay, AliExpress, or through a third-party site at a significantly lower price than the official store, you are likely using a clone. These cables use unauthorized software loaders. Step 2: Reprogram the FTDI Chip using FT_Prog

If your genuine cable was revoked due to a software glitch or failed update, you can often fix it yourself without waiting on support. Open the VCDS software. Click on Options . Click on Test .

How to Prevent Your VCDS License from Being Revoked in the Future

I am including this for transparency, but I strongly advise against it. If you insist on using a revoked clone for an older car (pre-2015):

Navigate to HKEY_CURRENT_USER\Software and delete the folder if it exists.

A "VCDS Revoked" error indicates that the software license embedded in your Ross-Tech interface is no longer recognized as valid, often due to using non-genuine hardware with official software or data corruption during a firmware update. To fix this, you can try , forcing a firmware update through the VCI Config utility, or reinstalling the USB drivers from the official Ross-Tech site . Understanding the "VCDS Revoked" Error