Locate the unit toggle button on the bottom of the casing. Press it while the scale is on to alternate between pounds (lb), kilograms (kg), or stones (st).
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Overload — Weight exceeds maximum capacity (usually 400 lb or 180 kg). | Remove weight immediately to prevent sensor damage. Use a scale with higher capacity. | | Lo | Low battery. | Replace all three AAA batteries simultaneously. Do not mix old and new. | | UnSt | Unstable weight — You are moving or scale is on a soft surface. | Stand still. Move scale to hard, level floor (tile, wood, concrete). Avoid rugs. | | 0.0 flashes | Scale cannot find a stable zero point. | Check if something is stuck under the glass. Clean the feet. Turn off and retry. | | OLED/Display fade | Extreme temperature or dying battery. | Let scale return to room temperature (50-95°F / 10-35°C). Replace batteries. |
Turn the scale upside down to locate the battery compartment. Remove the battery compartment cover. taylor scale manual 5789f
The scale is overloaded. It has exceeded its 400 lb (180 kg) capacity. Step off immediately to avoid damaging the sensors.
: Open the battery compartment cover on the underside of the scale. Insert three AAA batteries making sure the positive (+) and negative (-) terminals align correctly with the diagram inside. Locate the unit toggle button on the bottom of the casing
The is a glass body composition scale designed to estimate weight, body fat, body water, and Body Mass Index (BMI). It supports data storage for up to 10 users and features a 400 lb capacity with 0.2 lb increments. Initial Setup and Initialization
The scale will turn off automatically after several seconds of inactivity. | Remove weight immediately to prevent sensor damage
A memory location code like P1 or P2 will start blinking. Press the UP (▲) or DOWN (▼) keys to navigate to your chosen number. Press SET to lock it in.
Remove any plastic insulation strips from the pre-installed batteries. If inserting new batteries, ensure the positive (+) and negative (-) terminals align with the diagram inside the compartment. Replace the cover securely. 2. Positioning the Scale