Rok Power Washer - Instructions New

Clean at a 45° angle rather than directly perpendicular to avoid forcing water under siding or damaging wood grain.

: Pull back the collar on the spray wand and insert your chosen nozzle until it clicks into place. 2. Purging Air (Crucial Step)

Running it dry can destroy the pump in seconds.

: Plug the GFCI-equipped power cord into a standard 120V outlet. Press the Reset button on the GFCI plug to enable power.

Improper shutdown can leave residual high pressure trapped in the hose, creating a hazard. Follow these steps to shut down safely: rok power washer instructions new

Based on real user experience, here's how to troubleshoot and use the detergent function:

Let the soap sit for 3-5 minutes, then switch to a high-pressure nozzle to rinse from top to bottom. 5. Shut Down Procedure

If the nozzle becomes clogged with debris, the pressure will pulse. Use a small wire or nozzle cleaner tool to clear it.

Wide spray. Best for delicate surfaces, siding, and vehicles. Clean at a 45° angle rather than directly

Operating a power washer dry will instantly destroy the internal pump seals. Always purge the system before turning the power on.

Ensure all parts (gun, hose, nozzles) are included. Attach the handle with screws and push wheel spindles into place, securing with washers. Connect the high-pressure hose to the outlet and gun, ensuring they are hand-tight. Finally, insert the wand into the gun and lock it, then insert the desired nozzle using the quick-connect collar. How to setup and start a pressure washer

This releases the dangerous high pressure trapped inside the hoses. Engage the trigger safety lock.

Before you throw away any packaging, lay out all the parts and ensure you have the following standard components: Purging Air (Crucial Step) Running it dry can

Power washing is one of the most satisfying ways to restore the look of your home, driveway, deck, and vehicles. If you have just purchased a , you have a versatile tool designed to make heavy-duty cleaning tasks efficient.

Operating a power washer dry will permanently damage the internal pump within seconds. Always complete these checks before turning the machine on. For Electric ROK Models:

Fill the fuel tank with regular unleaded petrol. Do not use old fuel or mix oil with the petrol unless explicitly stated for a 2-stroke engine.

Attach the opposite end of the high-pressure hose to the base of the spray gun handle until it clicks or screws tightly into place. Assemble the Wand and Nozzles