Remove the protective caps from both the ONT's optical port and the fiber cable. Plug the fiber into the OPTICAL port until it clicks.
Connect the power adapter and wait roughly 2–3 minutes for the lights to stabilize.
Usually found on the sticker at the bottom of the device (often admin / admin or ALC#F7E ). nokia g-010g-r manual
Remove the protective dust caps from both the cable connector and the optical port on the bottom of the Nokia G-010G-R.
What are your device's LED lights showing? Remove the protective caps from both the ONT's
Check that the fiber optic cable is securely clicked into the bottom of the device. Ensure there are no sharp bends, kinks, or visible breaks in the fiber wire. If the connection looks secure, contact your ISP to check for area outages or line breaks. No Internet Access (LAN LED is On, PON LED is Green)
Change your computer's IP address settings to a static IP in the subnet (e.g., 192.168.1.50 ), with a subnet mask of 255.255.255.0 . Usually found on the sticker at the bottom
The LED indicators on the front panel of the Nokia G-010G-R tell you exactly what the device is doing. Use this breakdown to decode your network status. Solid Green The device is receiving power and operating normally. The device is powered off or the outlet lacks power. LINK / PON Solid Green
Place the G-010G-R in a cool, dry, and central location. Avoid placing it behind TVs or near large metal objects.
Carefully remove the protective cover from your incoming fiber-optic cable tip.