Confirm the default web UI port ( 8060 ) or specify an alternative.
Execute the binary as the root user or with sudo privileges to start the command-line setup wizard: sudo ./ManageEngine_NetFlowAnalyzer_64bit.bin -i console Use code with caution. Step 4: Respond to Console Prompts
Windows 8, 10, 11, Server 2012-2022; Linux (RHEL, CentOS, Ubuntu). Processor: Quad-core 2.4 GHz or higher. manageengine netflow analyzer installation guide top
RHEL 7 to 9, Ubuntu 18.04 to 24.04 LTS, CentOS 7+, Debian 10+. Port Requirements Ensure the following ports are open on your local firewall: 8060: Default web client port (HTTP/HTTPS). 9996: Default listener port for NetFlow data. 161 / 162: SNMP ports for device discovery and polling. 2. Step-by-Step Installation on Windows Step 1: Download the Installer
The hardware sizing depends directly on the volume of flow packets your network generates (measured in flows per second or FPS). CPU: Intel Core i3 or equivalent (2 cores, 2.4 GHz) RAM: 8 GB Hard Drive: 250 GB (SSD recommended) Medium Network (Up to 5,000 FPS): CPU: Intel Xeon or equivalent (4 cores, 2.4 GHz) RAM: 16 GB Hard Drive: 500 GB (SSD or high-performance HDD) Large Network (Up to 10,000 FPS or more): CPU: Intel Xeon or equivalent (8 cores or more) RAM: 32 GB to 64 GB Hard Drive: 1 TB+ Dedicated RAID 0 or RAID 10 SSD arrays Operating System Support Confirm the default web UI port ( 8060
Once the server is running, you must configure your network devices (routers/switches) to export flows to the Analyzer's IP address.
If you'd like to customize this deployment further, let me know: The you plan to use Processor: Quad-core 2
ManageEngine NetFlow Analyzer is a comprehensive traffic analysis tool that provides real-time visibility into network bandwidth performance. Whether you are monitoring a small office or a large enterprise, getting the installation right is the first step toward total network observability. ManageEngine Pre-Installation: System Requirements