Jk 1351 Driver Software - Jinka

Select the exact you noted down from the Device Manager.

Open Device Manager -> Ports -> Right-click your COM Port -> Properties -> Port Settings -> Advanced . Lower the Receive Buffer and Transmit Buffer sliders to their lowest settings. Ensure Flow Control in your software is set to Hardware .

If using Windows 11, you may need to disable "Driver Signature Enforcement" to install older driver versions. Conclusion Installing the correct Jinka JK 1351 Go to product viewer dialog for this item.

Data buffer overflow. The computer is sending vectors faster than the Jinka hardware cache can process them.

On Windows 10/11, you may need to "Disable Driver Signature Enforcement" in the recovery settings to allow the Jinka driver to install properly. ❌ "Device Not Recognized" jinka jk 1351 driver software

ArtCut is an older, legacy software frequently bundled directly with Jinka plotters. While visually dated, it contains the exact structural profiles needed for the JK-1351.

Do not plug the USB cable from the Jinka JK 1351 into your computer just yet. Keep it unplugged during the initial driver installation to prevent Windows from assigning a generic, non-working driver. 2. Run the Driver Installer

Experiencing cut errors, communication stalls, or sudden stops? Here are the most common solutions:

Click on and select The printer that I want isn’t listed . Select the exact you noted down from the Device Manager

Set the to Direct COM Port or Serial Port .

After installation, the driver package typically includes:

The Jinka JK 1351 is versatile and works with several popular programs. Here is how to configure them once the driver is installed:

Look for an entry labeled or FTDI USB Serial Port (COM4) . The specific COM number (e.g., COM3, COM4, COM5) assigned by Windows is critical for the next step. Configuring Your Cutting Software Ensure Flow Control in your software is set to Hardware

One of the most popular methods for using the Jinka JK 1351 doesn't require traditional drivers at all. Many users have successfully cut directly from CorelDRAW using , which are compatible with Jinka machines.

: Older versions of the hardware may struggle with drivers on Windows 10/11 without significant troubleshooting. Installation Tips for Success

| Feature | Specification | |---------|---------------| | Frame Material | Durable metal (steel) construction | | Drive System | Stepper motor for precise cutting | | Max Cutting Width | 1260mm to 1350mm (depending on model) | | Max Media Width | 1290mm to 1350mm | | Cutting Speed | Up to 800mm/s on advanced models | | Precision | ±0.1mm to ±0.05mm (model dependent) | | Connectivity | USB + COM + Flashdisk | | Certification | CE Certified |

Right-click the Windows Start Button and select . Scroll down and expand the Ports (COM & LPT) section.

Once the driver is active in Device Manager, you must map your design and cutting software to match the exact COM port number and transmission speeds. CorelDRAW & Artcut Configuration

The Jinka JK 1351 driver will not function until your specific design software is mapped to match the Windows Device Manager settings. CorelDRAW / Illustrator Direct Plugins