![[ANSYS, Inc. Logo]](https://www.afs.enea.it/project/neptunius/docs/fluent/html/udf/fluentlogo.gif)
|
|
|
The macros listed in Table 3.2.20- 3.2.23 can be used to return real face variables in SI units. They are identified by the F_ prefix. Note that these variables are available only in the pressure-based solver. In addition, quantities that are returned are available only if the corresponding physical model is active. For example, species mass fraction is available only if species transport has been enabled in the Species Model dialog box in ANSYS FLUENT. Definitions for these macros can be found in the referenced header files (e.g., mem.h).
Face Centroid (
F_CENTROID)
The macro listed in Table 3.2.20 can be used to obtain the real centroid of a face. F_CENTROID finds the coordinate position of the centroid of the face f and stores the coordinates in the x array. Note that the x array is always one-dimensional, but it can be x[2] or x[3] depending on whether you are using the 2D or 3D solver.
The ND_ND macro returns 2 or 3 in 2D and 3D cases, respectively, as defined in Section 3.4.2. Section 2.3.15 contains an example of F_CENTROID usage.
Face Area Vector (
F_AREA)
F_AREA can be used to return the real face area vector (or `face area normal') of a given face f in a face thread t. See Section 2.7.3 for an example UDF that utilizes F_AREA.
By convention in ANSYS FLUENT, boundary face area normals always point out of the domain. ANSYS FLUENT determines the direction of the face area normals for interior faces by applying the right hand rule to the nodes on a face, in order of increasing node number. This is shown in Figure 3.2.1.
ANSYS FLUENT assigns adjacent cells to an interior face ( c0 and c1) according to the following convention: the cell out of which a face area normal is pointing is designated as cell C0, while the cell in to which a face area normal is pointing is cell c1 (Figure 3.2.1). In other words, face area normals always point from cell c0 to cell c1.
Flow Variable Macros for Boundary Faces
The macros listed in Table 3.2.22 access flow variables at a boundary face.
Ensure they are using the correct version of macOS that the tool was built to support.
Once the core operating system was installed, users faced a frustrating maze of broken audio, non-functional Wi-Fi, inactive trackpads, and incorrect power management. The Hackintosh Vietnam Tool wrapped all necessary fixes into a single, comprehensive graphical user interface (GUI) installer package ( .pkg or packaged inside a .dmg disk image). Key Features of the Classic Tool
Hackintosh Vietnam - Ultimate AIO Tool (v1.9.6) is an "All-in-One" utility designed to simplify the installation and configuration of macOS on non-Apple hardware hackintosh+vietnam+tool+196dmg
The Hackintosh Vietnam Tool was a centralized software utility packaged primarily as a .pkg installer (often distributed within .dmg disk images for Mac environments). Developed by prominent figures in the Vietnamese Hackintosh community, it was designed to guide users through the crucial "post-installation" phase.
Instead of using automated packages, developers rely on the Dortania OpenCore Install Guide. Rather than downloading a giant AIO bundle containing hundreds of kexts you don’t need, you manually construct a tailored using precise, up-to-date tools: Ensure they are using the correct version of
The "Vietnam Tool" is a community-developed patcher (often credited to developers within the Vietnamese Hackintosh community, notably associated with the forums). Its primary purpose is to patch the macOS kernel and system frameworks to run on older Intel CPUs.
: Quick configuration of bootloaders, patching system kexts, and applying essential stability fixes. Key Features of the Classic Tool Hackintosh Vietnam
: Built-in script commands to safely generate custom SSDTs tailored directly to the host Intel CPU.
Provide a for your specific PC hardware.
See Section 2.7.3 for an example UDF that utilizes some of these macros.
Flow Variable Macros at Interior and Boundary Faces
The macros listed in Table 3.2.23 access flow variables at interior faces and boundary faces.
F_FLUX can be used to return the real scalar mass flow rate through a given face f in a face thread t. The sign of F_FLUX that is computed by the ANSYS FLUENT solver is positive if the flow direction is the same as the face area normal direction (as determined by F_AREA - see Section 3.2.4), and is negative if the flow direction and the face area normal directions are opposite. In other words, the flux is positive if the flow is out of the domain, and is negative if the flow is in to the domain.
Note that the sign of the flux that is computed by the solver is opposite to that which is reported in the ANSYS FLUENT GUI (e.g., the Flux Reports dialog box).
Previous:
3.2.3 Cell Macros
